On Site Machining Reaming Machine PA30
Note: This machine can be customized to meet different requirements, and the final technical data will be confirmed based on customer’s needs.
- The on site machining reaming machine PA30 is specially designed for reaming and boring in on-site machining services.. The maximum boring diameter of the equipment is Φ60mm, the minimum boring diameter is Φ35mm, and the floating cutter can be installed for processing to improve the processing quality. The Reaming Machine PA30 used in on-site field and mobile machining services is mainly composed of rotational drive unit , feed unit, mast, screw, power system, control cabinet and other components. This mobile on-site reaming machine is for reaming of coupling holes
- The on-site drilling and reaming machine PA30 has already assembled and adjusted before shipment, The user only needs to install the machine to one end of the workpiece to be processed by auxiliary tooling. This machine is calibrated to the equipment and the workpiece to be machined by four adjustment nuts on the four heightening nuts and auxiliary tooling.
- The structure is reasonable, the installation is simple, and it is easy to install and use in a small space, correction is quick and accurate. Powerful, with a maximum cutting depth of up to 2 mm on one side. The mast head has a Morse taper for easy installation of tools of different sizes and shapes. has the function of reaming, boring and reaming.
- The main bearing is equipped with imported double row cylindrical roller bearings and tapered roller bearings. The precision is high and the steel is large. The boring bar is made of alloy structural steel and is made by special technology. It has high strength, high hardness and high precision. Good toughness, hard chrome plating, good wear resistance and no rust.
- Power drive unit
- Feeding unit
- Boring bar
- Servo motor
- Speed reducer
- Cutter bar 3
- Electric cabinet with 10 meters of power wire( can cut off the power supply urgently)
- Handheld controller ( control line 10 meters)
- Full set of wrenches
- Ordinary file 1 size 12×12, hard alloy
|Max. rotation speed
|0.05-0.45mm/r and can be fed in
|Φ30mm～Φ35mm( cutter bar)
Φ35mm～Φ60mm (boring bar)
|The device drive mode
|Servo motor power
|Rated speed is 3000rpm
|Taper error of the machined hole
||≤0.02mm (220mm depth)